Jul.2023 21
Views: 142
Common faults and solutions of parking lot gate system
Details

Now the parking lot gate system can be seen everywhere in our life. The parking lot gate system is installed at the basic entrances and exits to manage the passing vehicles. The barrier works continuously for a year, so it is inevitable that there will be some failures. In fact, some failures can be solved by yourself.

Common faults and solutions of the parking lot gate system:

(1)The parking lot gate system is powered on, and the brake lever does not move when the button is pressed.

1. Check whether the power indicator light of the barrier gate controller is on.

2. Check whether the remote control of the barrier gate is matched or whether the battery is charged.

3. Check whether the beam-to-beam indicator light and the ground sense indicator light are on

 

(2)The gate lever of the parking lot gate system moves up and down and stops

1. Check whether the limit interface is plugged in

 

(3)The barrier gate system in the parking lot is normal. You need to press the button several times to get the rod in place

readjust spring balance

 

Four: The parking lot barrier system trembles during operation

The chattering during operation is mainly due to the disproportionality between the length (weight) of the brake lever and the tension of the spring. If the lever does not vibrate when it is lowered, but it will vibrate when it is lifted, it means that the tension of the tension spring is too strong, just loosen the tension of the spring.

If the upper rod does not move but the lower rod vibrates, it is due to insufficient spring tension. The tension spring should be tightened or replaced.